SANHA®-Therm (series 24000) | Carbon steel pipes & press fittings

Marking of the press fittings

SANHA®-Therm press fittings are marked on the outside with a red dot. The associated pipes are easily recognisable by a longitudinal red marking (line and lettering "SANHA®-Therm") and can thus be easily distinguished from pipes made of other steel grades on the construction site. 

The SANHA®-Therm series is also available in a special LABS* and silicone-free version with a red FKM sealing ring and in separate protective packaging (Series 27000).

*LABS = paint wetting disruptive substances

Your advantages

combipress® =

• Tool compatibility*: SANHA®-Therm fittings can be pressed with SA, V and M original contour press jaws or slings up to and including 54 mm and with SA and M original contour up to 108 mm. This eliminates any risk of confusion of tools on the construction site!
• Leak path feature (certified forced leakage before pressing with EPDM and HNBR sealing rings) in combination with 
• Push & Stay: the fitting sticks onto the pipe for an easy & convenient installation in any position

*The tool compatibility does not apply to special applications, such as fire extinguishing systems and industrial applications. Appropriate high-pressure pressing machines and press slings can be used here.

Quick assembly, no fire hazard

The connection with stainless steel pipes by cold pressing enables a quick, time-saving assembly and excludes a fire hazard during installation. This makes SANHA®-Therm installation systems extremely suitable for renovations.

High flexibility

• All dimensions 12 to 108 mm incl. 67 mm
• Secure, non-detachable, permanently sealed connection with carbon steel pipes according to BS EN 10305-3 or BS EN 10346 (DZ version)
• Transition thread according to BS EN 10226 or ISO7/1 type R and Rp
• Wide range of possible combinations:
  
  • SANHA®-Therm installation pipes, galvanised on the outside:
    Longitudinally welded, pressure-tight, thin-walled precision steel pipes, galvanised on the outside. Ideal for heating applications due to non-galvanised inner surface (no risk of pump contamination)
    unalloyed steel E195 (RST 34-2) with material no. 1.0034 according to BS EN 10305-3
    Delivery condition +CR1
  • SANHA®-Therm installation pipes in DZ design, galvanised inside and out: Longitudinally welded, thin-walled precision steel pipes made of unalloyed steel. The pipes are made of continuously strip galvanised steel (Sendzimir process) according to BS EN 10346. This leads to higher corrosion protection due to sendzimir galvanising on both sides and thus ideally suited for use in fire extinguishing and sprinkler systems. After galvanising, the strip material is an E 195 (Z275 MBO) with material no. 1.0034 according to BS EN 10305-3. Delivery condition +CR2. Available in dimensions 22 to 108 mm (sprinkler portfolio)

Please observe the generally applicable regulations for protection against corrosion. If you have any questions, please contact our technical application advice at technik@sanha.com or +49 2054 925170.

Areas of application

More applications on demand.